The Mining industry uses just about every type of heat exchanger and oil cooler for heavy plant, trucks, heavy equipment and processing. Mining oil cooler – maximum cooling capacity 100 kW
The Mining oil cooler with three-phase AC motor is optimized for use in the industrial sector. The system is supplied ready for installation. An integrated circulation pump makes it possible to cool and treat the oil in a separate circuit – offline cooling. The cooling system can also be equiped with filter unit. Together with a wide range of accessories, the Mining oil cooler is suitable for installation in most applications and environments. The maximum cooling capacity is 100 kW at ETD 40 °C. The most reliable way to size is with the aid of our calculation program. This program, together with precise evaluations from our experienced, skilled engineers, gives you the opportunity for more cooling per € invested.
ORCAER is designed primarily for synthetic oils, vegetable oils and mineral oil type HL/HLP in accordance with DIN 51524. Maximum oil temperature 100 °C.
- Maximum negative pressure in the inlet line is 0.4 bar with an oil-fi lled pump. Maximum pressure on the pump’s suction side is 0.5 bar.
- Maximum working pressure for the pump is 10 bar. For information about suction height, pressure, etc. see the QPM3 pump manual.
3-PHASE MOTOR
3-phase asynchronous motors in
accordance with IEC 60034-1
Nominal voltage *
Insulation class: F
Rise of temperature: B
Protection class ;IP 55
Recommended: -20 °C –
ambient temperature: +40 °C
MATERIAL
Pump housing :Aluminum
Cooler matrix :Aluminum
Fan blades/hub: Glass fi bre,reinforced,polypropylene/,Aluminum
Fan housing Steel
Fan guard :Steel
Other parts: Steel
Surface treatment :Electrostatically powder-coated
Lubricating Oil Self-Circulating Cooler Air Cooled Oil Cooler with a Oil Pump Independent Circulation Cooling
AE1470 series self-circulation hydraulic oil cooler
AE1490 self-circulating series hydraulic oil cooler
Flow rate: 160-250L/min
Pressure less than 20bar
Gear pump flow 35L/min
Control mode: 220v, 380v
This series of air-cooled hydraulic oil cooler adopts plate-fin structure, which has the characteristics of compact structure, light weight and high heat exchange efficiency. Compared with traditional or other radiators, the plate-fin structure provides the best heat exchange capacity of each unit, and the cooling effect is better than traditional copper tubes.
Oil Coolers
TECHNICAL INFORMATION:
We are pleased to offer a brand new range of Oil / Air coolers. Integrating compact design, high cooling and low noise. For full technical details please click on the PDF links below.
Silent EVO2 Series
The Silent EVO 2 Series heat exchangers are designed to connect directly to the hydraulic reservoir. These offline air/oil coolers offer a reduced noise level while utilizing a pump activated by an electric motor to automatically take the oil into circulation through the cooler and then return the oil back into the hydraulic circuit. This is a high efficiency heat exchanger cooling system.
TECHNICAL INFORMATION:
Lift Size up to 1000KG
Product Code: SIL25
SIL25 – SE2 25 SC 400 B02 (7.6 kW)
Lift Size from 1000KG – 2000KG
Product Code: SIL35
SIL35 – SE2 35 SC 400 B02 (11.9 kW)
Lift Size from 2000KG – 3000KG
Product Code: SIL45
SIL45 – SE2 45 SC 400 B02 (17.7 Kw)
All our oil coolers are supplied with the following items: –
1 x Thermostat kit.
6 Meters of R2T Hose to suit motor inlet connection with BSP Fem Connections each end to suit cooler
6 Meters of R2T Hose to suit pump outlet connection with BSP Fem Connections each end to suit.
Pump Suction Adaptor BSP Male/Male.
Matrix Return Adaptor BSP Male/Male
These units are designed to fit adjacent to the oil tank (on the same level). They are not suitable for mounting above or below.
These items are purchased on an individual basis on your behalf so please check the full manufacturers specification to ensure their suitability. Additionally all hoses and pipework are cut specially to your lengths. Because of this we are not able to accept returned items other than for faults covered by the manufacturer’s warranty.
N.B: The lift weights shown below are for general guidance only.